FA-INV-12V-750VA – Farber Power

Advance i-DSP technology delivers a pure sine wave output suitable for
electrical and electronic loads
More back-up time achieved through intelligent smart design of
transformer suing primary copper
100% copper design for long life and it delivers 15 a charging current for
quick charging of battery
Charging technique for superior performance of battery
Intelligent program reduces grid power consumption for recharging of
battery
Enhanced output voltage for battery performance of TV, Lights, Fans,
Computer, etc
Wide operation voltage range, charges battery at low voltage, increased
battery life

Model number	FA-INV-12V-750VA
Capacity	750VA
	NARROW MODE	WIDE MODE
Mains undervoltage cutoff /recovery	180 V / 190 V	100 V / 110 V
Mains overvoltage cutoff /recovery	265 V / 255 V	295 V / 285 V
Battery charging voltage	180 VAC to 265 VAC	100 VAC to 295 VAC
Output voltage (no load)	230 V
Changeover time	≤ 10 miliseconds	≤ 20 miliseconds
BATTERY
Quick charge current	13.5A
Normal charge current	10A
Boost charge voltage	14.5V
Float charge voltage	13.8V
Low battery cutoff point	10.4V
Number of batteries	1 *12VDC
Recommended battery	65 AH to 200 AH
Charge method	Constant current ,followed by constant voltage
Output waveform	Pure sine wave
Output frequency (UPS mode)	50 HZ
Efficiency	≥80%
Operation temperature	0 to 45°C
LED indicators	Mains,charging,UPS,low battery, overload
Audible alarm	Low battery,overload,short circuit
PROTECTIONS
Overload	105% load on UPS (auto reset within 5 re-tries)
overcharge	Control battery voltage and current through software
Short circuit	MCB Tripe in Main mode and UPS gets shut down in Back-up mode
Thermal	UPS get shut down when temperature reaches to 95 at inside UPS
Battery reverse polarity	DC fuse on PMB will fail when battery terminals connected wrongly
Battery deep discharge	UPS will shut down when battery voltage reches to 10.4 (per battery
Packing information
Quantity	1 piece
Net weight	8.4kg
Gross weight	10.3 kg
Dimensions	32.5 x 32.5 x 17.0 cm