Benefits
- Active power factor correction in all phases.
- True online double-conversion technology with high power density, utility frequency independence.
- DSP technology to guarantee high reliability.
- 50/60 Hz frequency converter mode.
- Cold start function to startup the UPS without utility.
- Emergency power off (EPO) function.
- N+X parallel redundancy.
- Accepts dual-mains input.
- Three segment charging mode to increase battery service life, optimize recharge time.
- Maintenance bypass available.
- Adjustable charging current.
- Optional touch colored LCD screen.
Specification
| MODEL | FA-UPSW-384V-10KVA -3PH/1PH |
FA-UPSW-384V30KVA -3PH/1PH |
FA-UPSW-384V60KVA -3PH/1PH |
FA-UPSW-384V100KVA -3PH/1PH |
FA-UPSW-384V120KVA -3PH/1PH |
|||
| Capacity(VA/Watts) | 10 KVA / 8 KW | 30 KVA / 24 KW | 60 KVA / 48 KW | 100KVA/80KW | 120 KVA / 96 KW | |||
| INPUT | ||||||||
| Nominal Voltage | 3 x 380VAC (3Ph + G or 3Ph + N + G ) | |||||||
| Acceptable Voltage Range | 304VAC ~ 456VAC | |||||||
| Frequency | 50 Hz ± 5Hz (±10%) | |||||||
| OUTPUT | ||||||||
| Nominal Voltage | 220VAC/230VAC/240VAC (Selectable) | |||||||
| Connection Type | Hardwire 3-wire (1 Ph+N+G) | |||||||
| Waveform | Pure Sine wave | |||||||
| Output Voltage Stability |
Steady state | ±1% | ||||||
| Transient state | ±5% | |||||||
| Frequency | 50 Hz | |||||||
| Frequency Synchronization Range | ± 5 Hz (Equal to bypass working range) | |||||||
| Frequency Synchronization Speed | 1~2 Hz/s | |||||||
| Crest Factor | 3:01 | |||||||
| Dynamic in-rush Voltage Range | 0%->100%->0% (R load) <±5%: 20%->100%->20% (R Load) ± 3% | |||||||
| Dynamic Recovery Time | 0%~100% RCD load: <60 ms recover to 90% of nominal voltage | |||||||
| Phase Displacement | 120º±1% (balanced load) 120º±2% (imbalances 50% of the load) |
|||||||
| Transfer Time | 0 ms | |||||||
| Overload Capability | 0%~110% continuous running; 110%~ 150% for 10 min~1 min; >160% for 200 ms | |||||||
| Short-circuit Capability | 60~100ms | |||||||
| Transient Response Time | < 5ms | |||||||
| BYPASS | ||||||||
| Connection Type | Hardwire 3-wire (1Ph+N+G) | |||||||
| Input Voltage Range | 220VAC ±25% | |||||||
| Overload Capability | 1.5 In~1.8 In 1h~30s | |||||||
| Short-circuit Capability | 1.8 In~ >2.0 In 30s~200ms | |||||||
| BATTERY & CHARGER | ||||||||
| Rectifier | Type | 6 pulse (12 pulse optional) | ||||||
| Rated output voltage | 220 VDC ( 384 VDC optional) | |||||||
| Charger voltage | 216VDC ~ 243VDC or 395VDC~435VDC (Adjustable) | |||||||
| Charging current (max) | Default 10A, Maximum=Capacity / Battery Voltage |
Default 10A, Maximum 40A | ||||||
| Battery | Type / Numbers | Support VRLA Battery / 16 – 18 pcs (adjustable) or 32 pcs (29~32 adjustable) | ||||||
| PHYSICAL | ||||||||
| Dimension, DxWxH (mm) | 800 x 800 x 1800 | 800 x 1200 x 1800 | 800 x 1600 x 1800 | |||||
| Net Weight (kgs) | 354 | 480 | 910 | 1620 | ||||