3PH STATIC INVERTER (15KVA – 75KVA)

Benefits

  • Wide Operating Voltage range
  • Phase sequence & phase failure protection
  • Voltage, current, temperature protection and alarm functions.
  • 100% Copper Transformer design for long life battery
  • Pure Sine Wave Output
  • Multi Stage Charging technique
  • LCD display for better user interface

Specification

MODEL NUMBER FA-INV-240V-
15KVA-3PH
FA-INV-360V-
20KVA-3PH
FA-INV-360V-
30KVA-3PH
FA-INV-360V-
40KVA-3PH
FA-INV-360V-
75KVA-3PH
Capacity 15KVA 20KVA 30KVA 40KVA 75KVA
INPUT
Nominal Voltage 3 x 380VAC (3Ph + G or 3Ph + N + G )
Mains Input Voltage Range 277VAC ~ 502VAC
Mains Input Frequency Range 180 VAC to 265 VAC
OUTPUT
Nominal Voltage 230V (P-N), 400V (P-P)
Frequency 50HZ (±0.5Hz)
Crest Factor >3:1
Waveform Pure sine wave
Total Harmonic Distortion (THDv) <3% (Linear Load), <5% (Non-linear Load)
Connection Type Hardwire 4-wire (3 Ph+N)
BATTERY
Charge current 15A 25A
Boost charge voltage 14.5V
Float charge voltage 13.8V
Low battery cutoff point 10.4V
Number of batteries 20 *12VDC 30 *12VDC
Recommended battery 65 AH to 200 AH
Charge method Constant current ,followed by constant voltage
Output frequency (UPS mode) 50 HZ
Efficiency ≥80%
Operation temperature 0 to 45°C
LCD indicators Mains,charging,UPS,low battery, overload
Audible alarm Low battery,overload,short circuit
PROTECTIONS
Overload 105% load on UPS (auto reset within 5 re-tries)
Overcharge Control battery voltage and current through software
Short circuit MCB Tripe in Main mode and UPS gets shut down in Back-up mode
Thermal UPS get shut down when temperature reaches to 95 C at inside UPS
Battery reverse polarity DC fuse on PMB will fail when battery terminals connected wrongly
Battery deep discharge UPS will shut down when battery voltage reches to 10.4V (per battery)
PACKING INFORMATION
Net weight 8.4kg 9 kg 10 kg 12.8 kg 16.5 kg
Dimensions (cm) 32.5 x 32.5 x 17.0 32.5 x 32.5 x 17.0 32.5 x 32.5 x 17.0 38.0 x 35.8 x 10.0 38.0 x 35.5 x 18.0